How To Use Tailstock In A Sentence
-
The apron and the tailstock are movable and are led on the lathe bed.
2. Structure of the regular engine lathe
-
A camlock makes it much more convenient to move the mini-lathe's tailstock to clear chips when drilling deep holes.
-
- For parts mounted overhung, the steady rest (without using the tailstock as counter-support) permits facing and boring operations to be performed, if it is used to support and guide the freely rotating end of the part (see Fig. 12).
7. Cylindrical turning and facing of long cylindrical parts
-
This serves to chuck short trunk pieces without using the tailstock centre.
2. Assembly of a Lathe
-
Securing a standard velocity Long Rifle cartridge in the headstock, we drilled a hollowpoint with a center drill driven in from the tailstock.
-
Mounted on the end of the headstock facing the tailstock is the spindle and the spur center or for face turning such as bowls and plates, or other This is the tailstock, the crank on the end forces the cup center into the end of the workpiece.
Undefined
-
Through the use of CNC tailstocks, the machine is capable of handling various shaft lengths.
-
The tailstock is used as a counter-holding device for turning long workpieces or for drilling,
2. Structure of the regular engine lathe
-
The workpiece is clamped between the trifurcate and the tailstock centre.
2. Assembly of a Lathe
-
The first step was to chuck it up in the lathe and, using an end mill in the tailstock, remove the nipple portion (where the cap used to go).
-
· The tailstock quill is brought into working position (Fig. 14) whereby special attention must be given to quill cleanliness.
3. Preparations for thread cutting by dies and taps
-
The four guide way design allows collision - free traverse movement of the tailstock.
-
I modified the tailstock on my Homier 7x12 minilathe by adding a handle to the nut that locks the tailstock in place.
-
The fixture has a dividing head on the left and a tailstock on the right.
-
A tailstock with tailstock centre serves as end support to the chucking device when processing longer workpieces.
2. Assembly of a Lathe
-
The workpiece is clamped between the trifurcate and the tailstock centre.
2. Assembly of a Lathe
-
Figure 55 Mechanical winding of a compression spring on the lathe 1 lathe chuck, 2 winding mandrel, 3 compression spring, 4 tailstock with live centre
5. Bending Techniques
-
This reduces the danger of splitting and, unimpeded by the tailstock, the hammer can be directed to the top, right-hand comer of the workpiece.
6. Turning Technology
-
Reaming with solid reamer means machining of close-tolerance holes (fitting holes) by means of a reamer which is fixed in the tailstock of the lathe.
4. Reaming with solid reamer
-
- When turning longer parts using the tailstock or steady rest as counter-support, the cylindricity of the part must always be checked.
6. Cylindrical turning and facing of shouldered cylindrical parts
