tailstock

How To Use tailstock In A Sentence

• The apron and the tailstock are movable and are led on the lathe bed. 2. Structure of the regular engine lathe
• A camlock makes it much more convenient to move the mini-lathe's tailstock to clear chips when drilling deep holes.
• - For parts mounted overhung, the steady rest (without using the tailstock as counter-support) permits facing and boring operations to be performed, if it is used to support and guide the freely rotating end of the part (see Fig. 12). 7. Cylindrical turning and facing of long cylindrical parts
• This serves to chuck short trunk pieces without using the tailstock centre. 2. Assembly of a Lathe
• Securing a standard velocity Long Rifle cartridge in the headstock, we drilled a hollowpoint with a center drill driven in from the tailstock.
• Mounted on the end of the headstock facing the tailstock is the spindle and the spur center or for face turning such as bowls and plates, or other This is the tailstock, the crank on the end forces the cup center into the end of the workpiece. Undefined
• Through the use of CNC tailstocks, the machine is capable of handling various shaft lengths.
• The tailstock is used as a counter-holding device for turning long workpieces or for drilling, 2. Structure of the regular engine lathe
• The workpiece is clamped between the trifurcate and the tailstock centre. 2. Assembly of a Lathe
• The first step was to chuck it up in the lathe and, using an end mill in the tailstock, remove the nipple portion (where the cap used to go).