How To Use Setscrew In A Sentence
-
The setscrew should not block any of the fuel gas bores and be positioned opposite the fuel gas supply pipe connection.
6. The Gas Otto Engine
-
The sleeves slide onto the roller frame and lock into place with a setscrew.
-
The barrel is held in place by a simple clamp and setscrew arrangement.
-
The device is a small "C"-shaped clamp with a setscrew for securing the clamp to the damper.
The Seattle Times
-
Of the three examples, only the brass tippings and setscrew of the plow plane suggest any enrichment, and of course these were not intended for decoration; in later years, however, boxwood, fruitwood, and even ivory tips were added to the more expensive factory models.
Woodworking Tools 1600-1900
-
Elevation and windage are adjustable by removing the two protective covers over the setscrews on the front of the sight housing.
-
The adapter is attached to the round rod with a setscrew.
Manufacturingtalk - manufacturing industry news
-
With today’s pad holders, I know the likelihood is low of losing the setscrew or of the pad sliding past it while it’s in place, tearing a groove down the center of the pad’s back side, but it is undoubtedly less secure than if the pad holder is in its proper orientation.
Technical FAQ with Lennard Zinn: Brake questions, compatibility and New Year’s feedback
-
Equipped with four different electromotive spanner, can be in the sleeve size 3 seconds easily remove or tighten various kinds of car wheels setscrew 1.
-
The venturi ring is held in position by a setscrew fitting into a small hole in the center of the circumferential fuel gas supply channel.
6. The Gas Otto Engine
-
If you have the type that slips over a copper nipple, use a hex key (also called Allen wrench) to loosen the setscrew on the underside to twist-pull the spout off.
-
1827 H. Knowles patented an iron-bodied bench plane that portended a change in form that would witness a substitution of steel for wood in all critical areas of the tool's construction, and easy adjustment of the cutting edge by a setscrew, and an increased flexibility that allowed one plane to be used for several purposes.
Woodworking Tools 1600-1900
