How To Use Rabbet In A Sentence
-
The Joint 5X5 AS is equipped with a pneumatic brake and a horizontal clamp which comes in from the front of the machine to stabilize the rabbet.
-
Ted also pointed out that a plane with a rabbeted sole would not be suitable for cutting tenons for post and beam construction, as I suggested.
-
I then lined the shadow box with Crescent wheat mat board before cutting two 1/4-inch plywood boards to fit into the back rabbet of the frame.
-
Is a good place to start: Of course, rabbet will avoid the facts and he and other will go off on some tangential escapade.
Came up empty and got dissed
-
The bench planes, smoothing planes, rabbets, and plows universally resemble those shown in this illustration from the pattern book of the Castle Hill Works, Sheffield.
Woodworking Tools 1600-1900
-
Silly rabbet, everybody knows that it's the Realclimate Team who's politicizing the science, and besides, the deniers are simply honest broker skeptics who just want to know the truth.
A Sister Soljah Moment
-
If necessary, trim the edge of the rabbet with the use of a sharp wood chisel to make a well-fit joint.
DIY Woodworking: How to Make Wood Joints (Part 2)
-
The part of the sole in front of the rabbet mouth was neatly clad with tinplate.
-
The difficult operation of sticking uniform sash bars was greatly simplified by these planes, which allowed both the sash molding and rabbet to be planed from one face.
-
Take a couple of young rabbets and half roast them; when they are cold take off the skin, and cut the rabbets in small pieces,
English Housewifery
-
I tape off the very outside 1/4 inch behind the rabbet of the frame and use that margin for the perspective grid marks for those pesky remote VPs.
Line Drawing
-
Rabbet joint - The rabbet joint is ideal for corner constructions such as in making drawers and bookcases:
DIY Woodworking: How to Make Wood Joints (Part 2)
-
By means of two rabbets, one fixed at the open end of the gallery and the other in the center, the testing chamber could be made either large or small by means of paper disks pasted on to the first or second rabbet.
Scientific American Supplement, No. 1082, September 26, 1896
-
If rabbets are worked manually, a straight, square strip (straightedge) must be mounted onto the workpiece as gauge for the accurate - to-size guidance of the rabbet plane.
7. Planing of Profiles
-
Baker's door-rabbet an iron ring, and coil of rope; whereon, with firm grip, on this side and that, we form our Queue: but mischievous deceitful persons cut the rope, and our Queue becomes a ravelment; wherefore the coil must be made of iron chain.
The French Revolution
-
The silver lace trim needed to line the underside of the rabbet so that the scalloped edge would peak out onto the backing board.
-
In this second and concluding part, the steps in making the four other types of wood joints (miter, mortise, rabbet, and tenon) are provided.
DIY Woodworking: How to Make Wood Joints (Part 2)
-
D.niel D. Whitker patented a combination saw and rabbet plane little different from one illustrated by André-Jacob Roubo in his _L'Art du menuisier_ in 1769.
Woodworking Tools 1600-1900
-
Tongues and rabbets are worked by means of the rabbet plane.
7. Planing of Profiles
-
rabbet," ploughed around the front, back, and sides of the drawers; or the top frame may have a tongue fitting inside the whole substance of the drawer, or the glass may be a fixture, beaded or puttied in on top, the whole of the bottom unscrewing from the drawer frame.
Practical Taxidermy A manual of instruction to the amateur in collecting, preserving, and setting up natural history specimens of all kinds. To which is added a chapter upon the pictorial arrangement of museums. With additional instructions in modelling a
-
Tatum rabbet planes are scarce to rare and this was a nice example.
-
November 3, 2008 at 3:32 pm yore bunny-rabbet naught fit in yore pokket, tho?
Itteh bitteh kitteh commiteh - Lolcats 'n' Funny Pictures of Cats - I Can Has Cheezburger?
-
The bar-glued or block-glued stairs are rabbeted on their stringboards, so that no gap can be seen even after the wood's natural shrinkage.
-
It is possible, of course, to cut this rabbet with a conventional fillister.
-
Standard redwood patterns include: tongue & groove, bevel, rabbeted bevel, shiplap, channel shiplap and V shiplap.
-
These include drawers with dovetails, chest sides rabbeted to receive front drawer supports, and the use of significantly thinner stock for drawer sides and bottoms.
-
The best readings of Inland Empire have rightly stressed the film's labyrinthine, rabbet-warren anarchitecture," writes k-punk.
GreenCine Daily: Shorts, 4/23.
-
My favorite part was when the reporter said "While this little guy is obviously a pit, eli rabbets in this country are huge pists
Rabett Run
-
Check the plans for the specified depth and thickness of all your dado and rabbet cuts.
-
The rabbets are cut out with a rabbeting-plane before mitering and assembling.
Handwork in Wood
-
The research on the joints of rabbet has great significance to the lateral stability of timber frame and Seismic Performance of Chinese history timber structure.
-
The steps in making the miter, mortise, rabbet, and tenon joints will be given in the second part of this article.
DIY Woodworking: How to Make Wood Joints (Part 1)
-
Mrs. Brazil, you look like smart woman; hoot two rabbets with one bullet;
Florida delegates file lawsuit to get delegation seated
-
The bench rabbets seen at the bottom of the photograph would not be much easier to fettle.
-
Some were, as usual, in snow-white smock-frocks of Russia duck, and some in whitey-brown ones of drabbet -- marked on the wrists, breasts, backs, and sleeves with honeycomb-work.
Far from the Madding Crowd
-
The components of the sash frame were molded using two separate planes, one to cut the glass rabbet and another to stick the decorative molding which was most frequently a common ovolo.
-
None was more appealing than D.niel D. Whitker's saw-rabbet plane (pat. 52,478) which combined "an adjustable saw with an adjustable fence or gage, both being attached to a stock with handle similar to a plane, forming together a tool combining the properties of the joiner's plow and fillister" (fig. 61).
Woodworking Tools 1600-1900
-
Joint planes, which accounted for 24 percent of the total, were made up of fourteen different types and included rabbets, standing fillisters, plows and panel planes.
-
Up and dressed a pease pudding with boyled rabbets and bacon to dinner for want of a cook-mayde, Sarah leaving us at dawn, and he loving it mightily.
The Ladies A Shining Constellation of Wit and Beauty
-
Some were, as usual, in snow-white smock-frocks of Russia duck, and some in whitey-brown ones of drabbet — marked on the wrists, breasts, backs, and sleeves with honeycomb-work.
Far from the Madding Crowd
-
The ribs spring from the solid mass of their own floors bolted in between the keelson and the keel; and the planking, or skin, is let into the rabbets, or side grooves, of the keel and firmly fastened to the ribs throughout by hardwood pegs called treenails.
All Afloat A Chronicle of Craft and Waterways
-
The rabbet for install the outer must be H7 tolerance, ensure a high axiality.
-
It is practicable, if a rabbet or mitered joint is used in the sides, but if the side pieces are butted or dadoed, the rabbet for the bottom shows.
Handwork in Wood