How To Use Furring strip In A Sentence

We used ipe wood strips as the skin of the structure, the ipe wood skin is devised as a double wall system, in which horizontal ipe strips are placed over vertical, furring strips. The Choy Residence by Terry & Terry Architecture
The gypsum board must be attached to the wood furring strips or underlying masonry using nails or screws.
These boards were erected vertically, butted side-by-side, to form the walls and then dressed out with furring strips and lath & plaster interior walls and the exterior covered with shiplap siding on the street-facing wall and tapered cypress weatherboard siding on the remaining exterior walls. Rebuilding New Orleans? « BuzzMachine
Seriously, find studs, they have to be there, mark and ck for levelness, then make a cleat (2) (a piece of 1x2 lumber - furring strip) that fits along length of shelf that you can screw to the studs. Asking for Help - SpouseBUZZ
Otherwise, wood furring strips are first nailed to the old ceiling or joists and the new files are stapled to these.

The gypsum board must be attached to the wood furring strips or underlying masonry using nails or screws.
That's the condition you will wish to duplicate, and this can be done with slatted frames made of furring strips on which laths are tacked one half inch apart.
Otherwise, wood furring strips can be nailed to the old ceiling or joists and the new tiles are stapled to these.
Tongue and groove boards are installed perpendicular to the furring strips, and are either face-nailed or blind-nailed through the tongues.
Secure each additional board to the furring strips by nailing diagonally through the top edge of the tongue.
The gypsum board must be attached to the wood furring strips or underlying masonry using nails or screws.
If you are working on an uninsulated exterior wall, we also recommend cutting rigid foam-core insulation to friction-fit in the spaces between the furring strips.