How To Use furring strip In A Sentence
- We used ipe wood strips as the skin of the structure, the ipe wood skin is devised as a double wall system, in which horizontal ipe strips are placed over vertical, furring strips. The Choy Residence by Terry & Terry Architecture
- The gypsum board must be attached to the wood furring strips or underlying masonry using nails or screws.
- These boards were erected vertically, butted side-by-side, to form the walls and then dressed out with furring strips and lath & plaster interior walls and the exterior covered with shiplap siding on the street-facing wall and tapered cypress weatherboard siding on the remaining exterior walls. Rebuilding New Orleans? « BuzzMachine
- Seriously, find studs, they have to be there, mark and ck for levelness, then make a cleat (2) (a piece of 1x2 lumber - furring strip) that fits along length of shelf that you can screw to the studs. Asking for Help - SpouseBUZZ
- Otherwise, wood furring strips are first nailed to the old ceiling or joists and the new files are stapled to these.
- The gypsum board must be attached to the wood furring strips or underlying masonry using nails or screws.
- That's the condition you will wish to duplicate, and this can be done with slatted frames made of furring strips on which laths are tacked one half inch apart.
- Otherwise, wood furring strips can be nailed to the old ceiling or joists and the new tiles are stapled to these.
- Tongue and groove boards are installed perpendicular to the furring strips, and are either face-nailed or blind-nailed through the tongues.
- Secure each additional board to the furring strips by nailing diagonally through the top edge of the tongue.