How To Use carburize In A Sentence
- -- The carbon - and nickel-steel gears are carburized separately owing to the difference in time necessary for their carburization. The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel
- The rivet stud shown in Fig. 37 is carburized while of its full diameter and then turned down to the size of the rivet end, thus cutting away the carburized surface. The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel
- Tough steels with a carbon content of less than 0.25% can be enriched with carbon (carburized) on their surfaces so that they contain 0.75 to 7. Surface Hardening
- The degree to which a bar may be decarburized depends upon the chemical analysis of the steel.
- In fact it is very difficult to distinguish between these two hardening agents when examining a carburized steel under the microscope. The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel
- Steel containing from 3 to 3.5 per cent of nickel is carburized between 1,650 and The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel
- This process unfortunately requires for its prompt success the use of a very large quantity of spiegel or of ferro-manganese, in order to sufficiently carburize and deoxidize the burnt iron, which is the final product of the blowing. Scientific American Supplement, No. 315, January 14, 1882
- carburize metal
- The carburized sleeves are heated in an automatic furnace, which takes them cold at the back and feeds them through to the front, by which time they are at the correct temperature. The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel
- In the original cooling or through subsequent heat treatment, a matrix can be internally decarbonized or carburized by depositing graphite on existing sites or by dissolving carbon from them.
