Get Free Checker

How To Use Tensile strength In A Sentence

  • A linear relation between shrinkage also tensile Strength and the function of amorphous orientation state, ( 1 - Xc ) fam , was founded.
  • Cyanoacrylates adhesives (also referred to as superglues), which form high shear and tensile strength, can be used to join nearly all materials.
  • Many framers use a cotton thread with just enough tensile strength to effectively hold the item, but not too much to cause damage.
  • For a hydro-fracture to form and propagate, fluid pressure must exceed horizontal stress plus the tensile strength of the overburden.
  • Cast iron cannot compare with steel in tensile strength.
Enhance Your English Writing Skills
Fix common errors and boost your confidence in every sentence.
Get started
for free
Enhance Your English Writing Skills
  • The tensile strength in a plashed hedge is actually the sum of the imparted strength and energy of the hedger. Wildwood
  • Force to break or ultimate tensile strength measured in newtons/m2 or pascals is increasingly criticized as an inferior measure of adhesion.
  • Tin is structurally a weak metal, and when used in bearing applications it is alloyed with copper and antimony for increased hardness, tensile strength and fatigue resistance.
  • The modulus is represented by the op line, the tensile strength by et, and the tensile elongation by oe.
  • Certain materials can be manufactured with a high tensile strength.
  • Lead may be added to the lower-strength manganese bronzes to increase machinability, but at the expense of decreased tensile strength and elongation.
  • The yield and tensile strengths of metals that crystallize in the body-centered cubic from iron, molybdenum, vanadium and chromium depend greatly on temperature.
  • Its light weight and high tensile strength make it easy to install and wonderfully versatile.
  • What you fill in between the box created is more filler and should not be needed to provide tensile strength if the home is constructed properly. Cinder block vs brick
  • The tensile strengths of amosite and crocidolite are comparable to that of chrysotile. Geology of asbestos
  • Subsequently, wrought iron, having superior tensile strength, replaced cast iron in framing buildings.
  • Because of its special properties such as tensile strength and wear resistance Nano Tech Wire
  • Viroc is superior on measures including resistance to insects, rot, and mold, fire resistance, and impact resistance, and inferior on parameters such as tensile strength. Alternatives for significant uses of formaldehyde in Massachusetts
  • It could be that 100 years from now, hunters will be using sports grade nuclear war heads or something with enough recoil to require high tensile strength steel stocks and an emergency medical backup team. The Hardest Kicking Cartridges
  • Our three North American automotive continuous-annealing lines, as well as some of our continuous-galvanizing lines, are capable of making the third-generation advanced high-strength steels that exhibit tensile strengths over 1,000 Megapascals with good ductility," says Blake Zuidema , director for automotive production applications at ArcelorMittal. New Steel Rolled Out for Cars
  • On the premise that the tensile strength and the end quenching hardness don ′t decrease too much, the impact value can be greatly increased by increasing chromium content in composition range.
  • The structural steels can be grouped conveniently on the basis of tensile strength.
  • A third important class of beamsplitters is fabricated from a high tensile strength elastic membrane (such as nitrocellulose) stretched like a canvas over a black anodized flat metal frame. Undefined
  • By one treatment, the tensile strength and elongation may be substantially raised.
  • Silicon, like manganese, is an important constituent of many steels, the alloy ferrosilicon being added to deoxidize and purify the metal and thus to increase its tensile strength. The Economic Aspect of Geology
  • Aircraft cable is best for this because it has greater tensile strength and can be pulled tighter.
  • That matrix has very low tensile strength.
  • For example, major ampullate silk, a very tough silk with a tensile strength comparable to Kevlar, is used for the primary dragline or scaffolding of the spider's web.
  • All the tested materials presented an increase in diametral tensile strength during the experiment.
  • A roof-area cross-member is nitrided (bonding titanium and nitrogen to the parent steel after stamping) to raise its tensile strength to 145,000 lbs/sq.-in.
  • The trend observed of increasing tensile strength of amphiboles from tremolite, to amosite, to crocidolite is directly related to the iron content of these fibers. Geology of asbestos
  • Other hybrid composites have a combination of colloidal and fine particles, and have better compressive and tensile strength properties than the microfine variety.
  • As the outer layers cooled, they compressed the inner layers, giving the cannon greater tensile strength.
  • Intriguingly, the tensile strengths of the mutant and wild type fibres were very similar which means that decreased coarseness was not achieved at the expense of strength.
  • Our documentation also says "There are various methods for 'approximating' strain based material data from the more readily available monotonic data such as tensile strength, modulus etc. All Discussion Groups: Message List - root
  • While dilution reduced the tensile strength, the contrast medium had no effect as a sclerosing agent.
  • The low tensile strength and low creep strength of lead must always be considered when designing lead components.
  • Tungsten has high tensile strength and good creep resistance.
  • Most people tend to ignore tensile strength and concentrate more on the gauge and diameter - but they shouldn't.
  • Moreover, the fibers have greater tensile strength than those in standard fiberglass insulation.
  • Parts made from this material replicate polypropylene tensile strength and elongation at yield, and stuck in the elongation direction.
  • A hand shot out to grab one of them; he began to add and subtract various pieces, experimenting with tensile strength and durability.
  • He hafted a series of replicated contracting-stemmed bifaces to notched wooden handles using adhesives of varying tensile strength; one was lashed only with deer sinew.
  • Lead may be added to the lower-strength manganese bronzes to increase machinability, but at the expense of decreased tensile strength and elongation.
  • The cementite, although adding to the tensile strength, is very brittle and the strength of the pearlite is the combination of the ferrite and cementite. The Working of Steel Annealing, Heat Treating and Hardening of Carbon and Alloy Steel
  • As the magma in the intruding sill moves updip, the tensile stress on an intersecting fracture above the sill becomes greater, and the tensile strength of the sediments becomes less.
  • The silk produced by the bivoltine races of silkworms possesses superior neatness and cleanliness, is without lousiness and has high tensile strength and stands to the international A grade.
  • As-cast tensile strengths as high as 800 MPa and elongations of 15 to 20% can be obtained readily in sand castings, and slightly higher values in centrifugal castings.
  • The term asbestos covers all fibrous minerals with some tensile strength which are poor conductors and can be used for heat-protection. The Economic Aspect of Geology

Report a problem

Please indicate a type of error

Additional information (optional):