How To Use Rocker arm In A Sentence

The rocker arms are roller tipped and ride on needle bearings mounted on individual stub shafts.
The cam follower rides against a push rod, which pushes against a rocker arm.
The "EPG" (two jaw) and "ETG" (three jaw) parallel gripper lines utilize a double acting piston and rocker arm design.
The rocker adjustment screw was fully backed out and the peened end was firmly stuck into the rocker arm NASIOC
The engine's camshaft drives the pump pistons through a roll rocker arm.

Rocker arms and clutch hubs are examples of automotive production parts that are surface hardened by induction.
Rather than open and close its valves with conventional camshaft, pushrods or cam chain, lifters, rocker arms and valve springs, the camless engine employs an electro-hydraulic actuator mounted above the valves.
Lifter lubrication is delivered down the pushrods from the galleries that oil the rocker arms.
The hammer area of rocker arms is hardened progressively or by oscillation.
No pushrod, rocker arm, or lifter is infinitely stiff; they all bend and deflect to various degrees.
Secondly, the kinematics equations of Rocker Arm Module are derived according to simplifying the robot's rocker arms as open chain mechanisms of space connecting rod.