How To Use Mortise In A Sentence
-
The new tenants are being put into occupation on probation; they are allotees of land and will not be able to claim possessive rights until the Land Commission is satisfied that they are capable farmers, and have proved their capacity to make productive use of th eland and furnish the regular payments that will amortise the purchase costs.
G.K.'s Weekly - Land Policy of Ireland
-
For these two are no longer categories in an existential phenomenology of Attention or Tyrolean woodcraft but fully amortised within the evident detritus of the Second World War, constantly alluded to in The White Stones.
-
All members with the exception of the collar ties and wind braces are mortised and tenoned together with long tapered pins that secure the joints.
-
joinery," mortised, and held by the skill and conscientiousness of its construction.
Arts and Crafts in the Middle Ages A Description of Mediaeval Workmanship in Several of the Departments of Applied Art, Together with Some Account of Special Artisans in the Early Renaissance
-
There are two main types - the mortise and tenon, and the dovetail.
-
They are most often used in new installations and as replacements because they are mortised into the frame of the door.
-
For example, we have mitre halving in Fig. 34, a mitre bridle joint in Fig. 74, a tongued and grooved mitre in Fig. 116, mitred mortise and tenon joints in Figs. 148 and 159, a dowelled mitre frame in Fig. 202, and a mitred dovetail in Fig. 286.
Woodwork Joints How they are Set Out, How Made and Where Used.
-
Rafter pairs are joined directly to each joist by means of mortise and tenon joints.
-
In the latter case the back strip may have a short barefaced blind tenon which is mortised into the upright, Fig. 278.
Handwork in Wood
-
Laminated cores give the doors dimensional stability; the windows feature insulated glass and mortise-and-tenon sashes.
-
Delete or abrase the scribed mortise lines for the stiffening transoms on the side opposite the corner tenon.
Chapter 7
-
The stock was made of hardwood, in two pieces, to simplify forming the wedge mortise.
-
It appears that the left side of the stock, as well, has been planed away slightly to open the left side of the iron mortise.
-
Place the hinge leaf in the mortise and position the self-centering tool in the countersink recesses of the hinge.
-
The bars were jointed to the stiles and rails using a small mortise with a corresponding tenon in the bar.
-
A notch or hole cut out specifically to fit a full mortise lock; it cannot be removed from the door by force.
-
If any licensing is done in a particular financial year, the fees are amortised over the lifetime of the collaboration.
-
The router is used to cut contours in wood for edgings and moldings or for more complex relief panels and inlay work, dovetails, and mortises.
-
The router is used to cut contours in wood for edgings and moldings or for more complex relief panels and inlay work, dovetails, and mortises.
-
Rafters were cut into mortised joints at the ridge, and braces buttress the walls in every direction.
-
If this chair had been produced by the sophisticated woodworking machinery of the late nineteenth or early twentieth century, it is reasonable to expect that the mortises would also have been machine cut.
-
The projection is called the tenon, and the cavity the mortise.
Woodwork Joints How they are Set Out, How Made and Where Used.
-
The establishing of a dissemination structure should be seen and communicated as an initial investment which will only begin to amortise after a certain duration.
3. The biogas dissemination programme
-
Mammoth tree trunks stretch across ceilings above hand-carved lintels, mortised into place in elaborate structures.
-
You will need to mortise the plate into the edge of the door so that it is flush with the surface of the edge.
-
For example, even the adoption of a new gambrel roof system with stud walls and a truss roof did not wholly eliminate the old heavy timber mortise-and-tenon construction system.
-
Benn added: 'Smaller batches and more set-ups mean that many companies no longer have the luxury to amortise the cost of bonded CBN wheels over extended production runs.
Manufacturingtalk - manufacturing industry news
-
The added work of chiseling mortises and cutting tenons for the joined stretcher, rather than setting a turned stretcher into drilled holes, seems to suggest a decorative aspiration rather than a structural need.
-
Helping to compensate for this are the joined struts that are mortised and tenoned to both the joists and rafters, in effect converting each rafter-joist pair into what might be described as the most primitive form of truss.
-
The bars were jointed to the stiles and rails using a small mortise with a corresponding tenon in the bar.
-
Use a sharp chisel or utility knife to enlarge the mortise in the direction that you need to move the plate.
-
And as a loan, Roma do not have to amortise the fee over the course of the contract and can now avoid what would have been €8m a year in accounting charges over the next five years.
FA set for club licensing power despite Premier League opposition
-
Near the upper end of the Cove, which is nearly a mile long, there stands a house built of squared logs, carefully mortised at the corners, and neatly "chinked" with plaster.
The Durket Sperret,
-
You can use a router to cut mortises for hardware, to joint and trim lumber, to create recesses for decorative inlays, and much more.
-
The old house had been built of the best materials, and its woodwork dowelled and mortised and tongued and grooved by men who knew their trade and had not learned to scamp their work.
The Colonel's Dream
-
The insurer said the new method reduced its life insurance reserve and allows its policy acquisition costs to be amortised on a more level basis over the life of the insurance contracts.
-
It's your call on what you can afford but I'd set it as high as possible so that you can amortise the risk over as many events as possible over your (one) life.
The Cranky Flier
-
The steps in making the miter, mortise, rabbet, and tenon joints will be given in the second part of this article.
DIY Woodworking: How to Make Wood Joints (Part 1)
-
I couldn't even get an assessment from Revenue Canada for three months and then I couldn't amortise my loans until I paid an interest-only payment of $715 bucks (I don't have any income at all - no savings, no partner, nothing).
-
He favors mortise-and-tenon joinery for his casework, frame-and-panel door construction, and dovetails at the front and back of each drawer.
-
The joined struts are mortised and tenoned to both the joists and rafters.
-
They employ hand-chiseled mortises and tenons.
-
Then cut a V-channel across the mortise anywhere within the mortise.
-
Both the English and Dutch used heavy timbers to construct mortise and tenon frames.
-
However, the cost of infrastructure is amortised over a longer period that reflects the long lives of social infrastructure.
-
He favors mortise-and-tenon joinery for his casework, frame-and-panel door construction, and dovetails at the front and back of each drawer.
-
The Group's remaining consolidated public CDO CDO V continues to use cash generated by its collateral to service interest on senior and mezzanine notes with any excess cash being available solely for reinvestment or to buy back or amortise senior debt.
Reuters: Press Release
-
Mortise attachments are very popular, allowing you to drill precise mortises with your drill press.
-
There is also a fencing division that produces garden fencing, picket fencing, post and rail and mortise fencing.
-
Jefferson simplified the complicated joinery of mortises, tenons, and wooden keys by substituting laminated sections fabricated with an abundance of nails readily available from his plantation nail factory.
-
For that piece that went upright from the earth to the head was of cypress; and the piece that went overthwart, to the which his hands were nailed, was of palm; and the stock, that stood within the earth, in the which was made the mortise, was of cedar; and the table above his head, that was a foot and an half long, on the which the title was written in
The Travels of Sir John Mandeville
-
All members with the exception of the collar ties and wind braces are mortised and tenoned together with long tapered pins that secure the joints.
-
With their unique design this sleek chair is available in a variety of domestic and exotic hardwoods, and features double tapered laminations, and mortise and tenon joinery.
Birdy Chair
-
Unpinned splat tenons have room to expand and contract within the mortise, avoiding splitting.
-
Drill into the frame and into the stud behind it at this point, mortise the frame to accept the strike plate, then attach the plate to the frame.
-
Useful machines are an electric drill, a small router to make mortises and mouldings, and a small bandsaw.
-
If the door is not plumb, you may have to adjust the hinge in its mortise.
-
The joints would all be familiar to a carpenter - mortise and tenons, dovetails and wedges - but this was the traditional way in which iron structures were joined at the time.
-
The two segments are held together by series of mortise joints, shimmed with wooden wedges.
Create Your Own Minimalist Storage With Hungarian Shelves | Lifehacker Australia
-
Browning claims eternity as the due of every man, however mean; and if Whitman feels his foothold 'tenon'd and mortised in granite', it is because he can 'laugh at dissolution' and knows 'the amplitude of time'.
Recent Developments in European Thought
-
cheeks" and the "shoulders" of the tenon are the parts abutting against the mortised piece.
Handwork in Wood
-
According to these orders, Robinson supplied fifty mortise locks, thirty-six pairs of octagonal glass knobs, twelve plain knob sets, and forty-eight escutcheons.
-
Straps and rings for bobstay plates are extant in the lower stempost, with mortises into the wood to admit the bobstay chains.
-
The mortised joint is even neater than the butt joint, but you must cut a mortise into the post for this joint.
-
In the case of inserted stairs without arris for insertion of the steps, the stair foot and stair head may be inserted in the mortise
6. Assembly of the Stair Components
-
You can talk about building roads and bridges as actual investment and as long as you amortise some of it you can capitalise some of it too, but nothing like at the current ratios.
Thirty Million Musketeers
-
The frame is completely made of wooden parts solidly linked by many mortises and tenons held together by a sophisticated system of brackets.
-
Tenons have room to expand and contract within the mortise, avoiding splitting.
-
All members are mortised and tenoned together with long tapered pins that secure the joints.
-
These rails are held together by mortise and tenon joints.
-
Teak furniture is generally all made with mortise and tendon joinery.
-
Drill a hole and chisel a shallow mortise in that jamb for the strike plate.
-
The Land Bank has already also restructured its funding programme in order to amortise these debt obligations in March 1993.
ANC Daily News Briefing
-
The assembly of the garboards with the middle body of the keel is made by mortise-and-tenon joints.
-
An iron bar of rectangular cross-section is mortised into the sole, to form the mouth front.
-
The rear screw hole had to be drilled at an angle through the top chamfer, next to the side of the throat mortise.
-
Rafters were cut into mortised joints at the ridge, and braces buttress the walls in every direction.
-
The increase in value had to be expressed in the accounts on both the asset and the liability side, and both needed to be amortised at an equal rate.
-
Another interesting joinery detail is the use of angled supports through mortised and wedged into the end joists as nailers for the interior cornice.
-
Slabs are doors without mortises for hinges or holes drilled for locksets.
-
The extractor is massive and mortised into the side of the bolt.
-
Mark each mortise directly from the tenon which is to fit into it, taking care to have all the rails an equal distance from the floor.
Mission Furniture How to Make It, Part 2
-
Interestingly, neither the chairs nor the armchair have side rails mortised through the rear posts as is so common (but not universal) in Philadelphia work.
-
The peasants 'houses are scattered up and down without any order or arrangement, and with no roads between, built of trunks of trees, unsquared, and mortised into each other at the corners, the interstices filled with moss and mud, a mode of building warmer than it sounds.
Russia As Seen and Described by Famous Writers
-
Instead, they still utilize the same construction techniques - mortises, tenons, floating panels, shiplaps and dovetails - used centuries ago in building fine antiques.
-
You can use a router to cut mortises for hardware, to joint and trim lumber, to create recesses for decorative inlays, and much more.
-
The large sash windows of his 100-year-old home were fitted with bolts, and a mortise lock and a spy hole were fitted in his front door.
-
Think about your salary, and amortise it over a reasonable period.
Studying the Mandaeans: Sources and Questions
-
Usually, joiners cut, carved, and painted all the stiles, rails and panels before putting them together with mortise and tenon joints secured by wooden pins.
-
The router is used to cut contours in wood for edgings and moldings or for more complex relief panels and inlay work, dovetails, and mortises.
-
Usually, joiners cut, carved, and painted all the stiles, rails and panels before putting them together with mortise and tenon joints.
-
This shows a simple French mortise and tenon joint with a pin inserted for strength.
-
The mortise lockset is the most secure locking mechanism for a door.
-
The first is a heavy mortise chisel, of the variety affectionately called a ‘pigsticker’.
-
When the repayments have all been made, this part of the cost of production ceases; the association capital may be regarded as amortised, and the prices of the commodities produced sink -- again under the influence of the free mobilisation of labour; so that the members of the association individually profit as little by the employment of burdenless capital as they suffered before by the liquidation of their burden.
Freeland A Social Anticipation
-
Instead, they employ hand-chiseled mortises and tenons, which are secured by wooden pegs that must be carved by hand.
-
Drill a hole and chisel a shallow mortise in that jamb for the strike plate.
-
The router is used to cut contours in wood for edgings and moldings or for more complex relief panels and inlay work, dovetails, and mortises.
-
That's why so many old guns have a broken wrist or lock mortise.
-
Mark and cut the mortise and recess for the strike plate using the same method used for installing the lock.
-
Each piece of furniture is built as if it were full size, with proper mortise and tenon joints rather than glue.
-
The mortise is the cavity hollowed to fit the tenon, which is the end of the interlocking beam, shaped to fit smoothly into the mortise.
Columbia Missourian: Latest Articles
-
The router is used to cut contours in wood for edgings and moldings or for more complex relief panels and inlay work, dovetails, and mortises.
-
In this second and concluding part, the steps in making the four other types of wood joints (miter, mortise, rabbet, and tenon) are provided.
DIY Woodworking: How to Make Wood Joints (Part 2)
-
You can use a router to cut mortises for hardware, to joint and trim lumber, to create recesses for decorative inlays, and much more.
-
To finish the shocking description, in a dark nook stood an old broken-bottomed cane couch, without a squab, or coverlid, sunk at one corner, and unmortised by the failing of one of its worm-eater legs, which lay in two pieces under the wretched piece of furniture it could no longer support.
Clarissa Harlowe
-
With an octagonal cross section, the frame of the pagoda is completely made of wooden parts solidly linked by many mortises and tenons held together by a sophisticated system of brackets, in 54 different varieties.
-
Lay out the mortises in the legs, taking the measurements directly from the tenon which is to fit that mortise.
Mission Furniture How to Make It, Part I
-
a tenon, which is fitted into a mortise that is dug through some growing tree, or other, of those which generally abound convenient to the tobacco house, something more than five feet above the platform.
Tobacco; Its History, Varieties, Culture, Manufacture and Commerce
-
Furthermore, ongoing success in the international wheel industry can only be achieved if you are right at the forefront of technology and design and are in a position to achieve manufacturing efficiency and economies of scale, coupled with continual improvement of quality at competitive prices ...... none of which is possible unless you are big enough to amortise the high levels of expenditure involved," says
ANC Daily News Briefing
-
The outer front door of the porch had a mortise lock which had showed no signs of being forced.
-
I said that over, say, a 20-year period we should amortise the cost of that - $174 million, I think it was - in order for us to see that figure.
-
(See page 27.) (_f_) A ring of hewn Sarsen stones with "imposts" or lintels mortised to them.
Stonehenge Today and Yesterday
-
The large-bore spiral auger still denoted a mortise, tenon, and trenail mode of building in a wood-based technology; at the same time its near cousin, the wheelwright's reamer, suggested the reliance upon a transport dependent upon wooden hubs.
Woodworking Tools 1600-1900
-
Place the hinge leaf in the mortise and position the self-centering tool in the countersink recesses of the hinge.
-
Replace the faceplate on the lathe, spread some glue in the mortise and use the tail stock to clamp the mandrel in place.
-
Rafter pairs are joined directly to each joist by means of mortise and tenon joints.
-
There are two main types of joint- the mortise and tenon, and the dovetail.
