How To Use Locknut In A Sentence
-
Secure with locknut and gaskets. Install valve assembly.
-
Holder is made from 2 laser-cut metal plates, a bolt, and locknut, and is powder painted black.
WN.com - Articles related to PPD and Microsoft to Deliver Innovative REMS Solution Based on Microsoft Technologies
-
Even when fully tightened, the bolts do not extend beyond the nylon locknuts (the bolt ends are level with the nylon; showing no threads at all).
-
The locknut (if fitted) has to be released to allow the operating screw to move and should be relocked after each adjustment.
Chapter 5
-
For the record, these new locknuts really do address the past concerns, and it was a snap disassembling the unit.
-
Also Clay, that locknut is used to, I was told set the head spacing for the rifle.
Savagery in South Dakota
-
Once the drain is correctly in position, tighten the locknut with a wrench.
-
With titanium bolts, the locknuts are plated with rhodium or silver to prevent galling and seizing of the nut to the bolt.
-
This rider should confirm that his rear hub measures at least 126 mm between the locknuts (you never know).
-
The vertical and horizontal position of the rest can be accurately adjusted by loosening the locknuts and turning the adjustment bolts.
-
The screw and locknut can be fitted to either the plug or the receptacle.
Electronicstalk - electronics industry news
-
I call it the “syncopated pedaling creak,” usually a sign that the locknut on a campy cassette is not tight enough.
Technical FAQ with Lennard Zinn: Bike creaking solutions
-
There's two allen bolts that adjust the riving knife from side to side and a screw with a locknut that adjust the angle.
Amazon.com Gold Box Deals
-
Tighten locknut 1 to fix the thread stand.
-
Next screw down the outer locknut and tighten them against each other just like on the other side.
-
The series features an actuating screw and locknut to facilitate mating and to provide a secure and robust interconnect.
Electronicstalk - electronics industry news
-
Such devices include means to inspect cables and anchorages, locknuts, or grub screws for cross arms, pivots, etc.
-
I have placed a dot of paint on the locknut and fork to match up so that mine is centered.
-
The transformer will be equipped with a sleeve and a locknut for connecting it to the junction box securely.
-
With titanium bolts, the locknuts are plated with rhodium or silver to prevent galling and seizing of the nut to the bolt.
-
With titanium bolts, the locknuts are plated with rhodium or silver to prevent galling and seizing of the nut to the bolt.
-
The adjusting nut and the anti - fake seal fixing body are arranged on locknut through screw threads.