How To Use Live load In A Sentence
-
Working deflection = [delta] = l²/10,000h, where l is the span and h the depth of the beam, the stresses being those usual in bridgework, due to the total dead and live load.
Encyclopaedia Britannica, 11th Edition, Volume 4, Part 3 "Brescia" to "Bulgaria"
-
For this particular bridge the amount of prestressing was determined by limiting the axial tensile stress in the slab to approximately half the cracking strength of the concrete under 50 percent of the design live load.
-
Based on the new method, live load layout for arch springing section and truss arch rib section were based on the bending moment influence line and the stress influence line respectively.
-
Within the brick hulk, where floors can support a live load of 3 tonnes per square metre, up to 700 parking spaces and a services level can be tucked out of sight.
-
Then calculate vertical load ( constant load and live load ) under the Internal Forces.
-
Allowable reductions of live load in accordance with applicable building code provisions should be applied during the preliminary design phase.