How To Use Lap joint In A Sentence
-
The door is made with simple but strong half-lap joints, using just a few basic hand tools and a circular saw.
-
Nail through the shiplap joint but don't nail in the channel groove.
-
They overlap with a shiplap joint between courses and a lap joint between shingles in the same course.
-
Thoroughly has changed present encaustic tile mutual lap joint form.
-
On the bridge, Heartland Wood & Cork Flooring installed the walnut planks at a 90-degree angle, with lap joints at the centre line.
-
The mode of working is as follows: For shell plates, from five-eighths inch to seven-eighths inch thick, to warm each to a dark red heat before rolling, having previously drilled a few holes to template for bolting the strakes together; the longitudinal seams are usually lap joints treble riveted, requiring the corners to be thinned, which is done after rolling.
Scientific American Supplement, No. 299, September 24, 1881
-
The results indicate that good lap joint between aluminum and galvanized steel sheet can be made in appropriate parameters.
-
The results indicate that good lap joint between aluminum and galvanized steel sheet can be made in appropriate parameters.
-
The pin load distribution of scarfed lap joint was studied using ABAQUS software.
-
The results indicate that good lap joint between aluminum and galvanized steel sheet can be made in appropriate parameters.
-
After the surface has been thoroughly dried, apply one coat of a paintable water repellent preservative or water repellent to the bare wood, being careful to liberally treat end and lap joints.
