How To Use Handwheel In A Sentence
-
Sweep forward two full turns of the handwheel and then one turn back.
Boing Boing: June 26, 2005 - July 2, 2005 Archives
-
Carefully remove handwheel and turn indicator sleeve assembly, leaving the valve at its balance set point.
-
The entire operation was accomplished by turning a handwheel until the pointer indicated the desired angle on the graduated scale on the pedestal.
-
Handwheels have finger grips cast on bottom of rim and are fastened with a cap screw and lock washer.
-
I guess so," he mumbled, and turned the handwheel to undog the outer door.
Three Worlds to Conquer
-
Twist the handwheel baseplate and handwheel grip until the decimal indicator displays 0-0, then refit the complete handwheel assembly onto the valve stem.
-
Includes floorstand with gate position indicator, handwheel, fittings and extension.
-
This dimension must be at least twice dimension from line to handwheel.
-
He closed the hatch behind them, whirling the handwheel.
Proud Helios
-
The extension includes fittings and extension pipe with handwheel mounted.
-
Rotate handwheel from full OPEN to full SHUT positions several times to assure proper operation.
-
Since the force on the right countershaft is downward, neither a tenon nor a handwheel is required.
-
The extension includes fittings and extension pipe with handwheel or nut mounted.
-
Handwheels have finger grips cast on bottom of rim and are fastened with a cap screw and lock washer . Worm-type gearing is completely enclosed in a housing.
-
With your right hand, turn the balance wheel, or handwheel, one complete turn.
Steps on the Proper Threading of Sewing Machines
-
The device is operated by a pushrod (5) which is either connected to a handwheel (6) - requiring a thread on the pushrod and a nut in the handwheel
1. CONSTRAINTS AND PROBLEMS
-
Remove the access screw; do not remove handwheel.
-
Actuation – can be supplied with a hammerblow handwheel, manual gear set, electric motor operator, pneumatic Globe valve calss 300Lb or hydraulic cylinder operator.
-
Handwheels have finger grips cast on bottom of rim and are fastened with a cap screw and lock washer.
-
Larger more comfortable malleable iron handwheel for easier operation.
-
Twist the handwheel baseplate and handwheel grip until the decimal indicator displays 0-0, then refit the complete handwheel assembly onto the valve stem.
-
The extension includes fittings and extension pipe with handwheel or nut mounted.
-
I guess so, " he mumbled, and turned the handwheel to undog the outer door.
Three Worlds To Conquer
-
The Saddle is fitted with yoke-mounted roll-screw and nut elevating gear actuated by handwheels on either side of the saddle.
-
The handwheel turned easily since the weight of the machine's upper part was counterbalanced.
-
Directly above his head and within reach was a circular manhole, counterweighted and operated by a handwheel set in its center.
The Past Through Tomorrow
-
Gröschl stepped on the rocker plate which controlled the power traverse and at the same time adjusted the elevation handwheel.
Panzer Aces
-
They'd alternate at the hydraulic aiming system and the handwheel which recharged the batteries that drove it.
Ensign Flandry
-
With the handwheel, raise the take-up lever to its highest position.
Steps on the Proper Threading of Sewing Machines
