How To Use Fluorescent lamp In A Sentence
-
All lamps were operated outside the sunbeds in a horizontal position over a fluorescent lamp ballast, similar to the way in which they are used in common sunbeds.
-
Countries will have to use energy-efficient compact fluorescent lamps instead.
The Sun
-
The clue to the flourishing creativity lies with phosphor chemistry, which is essential to the manufacture of fluorescent lamps.
-
All fluorescent lamps used as sources for UV-B radiation necessarily emit UV-C, UV-A and a small flux of blue visible radiation.
-
A fluorescent lamp must be connected to a stabiliser, or ballast, to limit and control its operating current.
-
Countries will have to use energy-efficient compact fluorescent lamps instead.
The Sun
-
The light-emitting surface was equipped with a translucent lens to diffuse the light and obscure the direct view of the individual fluorescent lamps suspended within the luminaire.
-
A typical fluorescent lamp is a tube with metal electrodes at each end.
-
There are many types of fluorescent lamp available so the range of conventional starters is equally varied.
-
The three separately switchable, compact fluorescent lamps in red, green and blue, not only produce these primary colours, but also three secondary-colour pastel shades and one shade of white.
-
Using Dimmable Electronic Ballast for Fluorescent lamp in Theater Project.
-
In special cases additionally an anti-interference set may be built into the fluorescent lamp or the control gear of fluorescent lamps may be housed in separately arranged cubicles.
5. Fundamentals of installation engineering
-
A typical fluorescent lamp is a tube with metal electrodes at each end.
-
Provided is a fluorescent lamp with a build-in lighting circuit for fixing glass lamp house reliably without relation with a bonding agent state, and a method for manufacturing the same.
-
The flicker produced by fluorescent lamps is a result of the pulsing of the arc within the lamp.
-
Fluorescent lamps generate light by passing electricity through a tube filled with inert gas and a small amount of mercury.
-
You should also consider compact fluorescent lamps for areas where lights are on for hours at a time.
-
Several requirements have to be considered when designing a fluorescent lamp.
-
Arena footpath also installed the fluorescent lamp that conceals type, add the faint illuminate of other line lamp, build the site a your person to confuse drunk atmosphere.
-
‘That said, you can still go down and buy a fluorescent lamp for a few dollars that puts out thousands of lumens,’ he says, compared to the 30 to 60 lm emitted by current white LEDs.
-
Fluorescent lamps can also be operated by direct current voltage, if the lacking a.c. resistance is replaced by an ohmic resistance and the lamp is pole-changed from time to time with the help of an intermediate switch.
5. Light Sources for Illuminating Purposes
-
A typical fluorescent lamp is a tube with metal electrodes at each end.
-
However, the cloudiness of the skies and light pollution from the sodium vapour and fluorescent lamps cut visibility.
-
Countries will have to use energy-efficient compact fluorescent lamps instead.
The Sun
-
Fluorescence has been utilized for many purposes, the most obvious being fluorescent lamps.
-
A typical fluorescent lamp is a tube with metal electrodes at each end.
-
The clue to the flourishing creativity lies with phosphor chemistry, which is essential to the manufacture of fluorescent lamps.
-
Another way to prevent global warming is by replacing the candescent bulbs in homes with compact fluorescent lamps (CFL).
