How To Use Drill bit In A Sentence
-
The lathe is a circular vise that can hold a drill bit or a blade and rotates at a high rate of speed, Mr. Riggs said.
Yale Student Dies in Chemistry-Lab Accident
-
Are drill bit registration checked by cross - section or X - ray ? What is the frequency?
-
An existing underground pipe was ruptured by a drill bit from a digging machine.
-
Use the drill bit included in the Micro Sensor Skull Bolt Kit to perform a cranial ostomy.
-
Place the entire steering knuckle assembly in a vise and re - drill using the # Q drill bit.
-
The 33 miners, all of whom had spent the past 12 hours in anxious vigil gathered at the section of the tunnel where the drill bit entered, celebrated.
Chilean miners closer to freedom with rescue tunnel complete
-
Drilling can be done with many of the same tools you use for drilling wood or metal, including twist drills, brad point drill bits, spade bits or a hole saw with a pilot bit.
-
Use the drill bit included in the Micro Sensor Skull Bolt Kit to perform a cranial ostomy.
-
Tunnels are then placed in the ulna and medial epicondyle with a 3.2-mm drill bit.
-
Nowadays, most tool purchases involve replacing the expendable items such as drill bits, sanding belts and specialty taps and anything else that wears out.
-
He began the process of clipping various tools to his brother's belt - nail gun, replacement clips, throwing chisels, hammers, saw blades, sander, drill bits.
-
Then drill these holes on the band and joists, again using a drill bit one size smaller than the shank of the lag screw.
-
Get the special drill bit to bore the correct-size hole for the job.
-
Use the drill bit included in the Micro Sensor Skull Bolt Kit to perform a cranial ostomy.
-
Make sure you keep the drill bit truly vertical 5 Chop out the waste material to produce a clean rectangular shape.
-
Start the holes off by turning the drill bit where centre of the markings are.
-
Drill bit and equipment supplier Baker Hughes of Houston has hired 1, 100 new workers in the past year.
-
It has reverse action which is basically used for removing debris and jammed drill bits.
-
If you've ever drilled a hole through a relatively thick piece of steel, you know that drill bits tend to wander quickly.
-
Pumping their feet on the treadle would turn the drill bit in the patient's tooth.
-
But today oil companies are capable of drilling only as deep as six miles, and this in sedimentary rock; in igneous and metamorphic rock, drill bits have so far penetrated only two miles.
2008 February 02 « Unambiguously Ambidextrous
-
The family-run store in Texas that's been mixing drill bits and Limoges boxes for more than 60 years.
-
He's wearing a belt with screwdrivers, drill bits, spanners, hacksaws and nails lodged in every pocket.
-
He began the process of clipping various tools to his brother's belt - nail gun, replacement clips, throwing chisels, hammers, saw blades, sander, drill bits.
-
Drill bits are not an easy tool to sharpen correctly.
-
To catch up, Smith designed drill bits featuring synthetic diamonds with curved surfaces, rather than more conventional flat versions.
-
Self-tapping screws have a special point that resembles a drill bit and are capable of cutting their own pilot hole in light gauge sheet metal.
-
Nowadays, most tool purchases involve replacing the expendable items such as drill bits, sanding belts and specialty taps and anything else that wears out.
-
Half were for drilling mud, the carefully engineered goo that was used to lubricate and cool the drill bit as it ground its way down through the rock beneath the surface of the ocean.
Gideon’s war
-
It is made from granite roughbacks and discarded drill bits.
-
A second handle is a very worthwhile extra with a percussion drill, allowing greater control of the drill bit.
-
When drilling into metal, squirt a lightweight oil onto the drill bit and into the hole to tool the bit.
-
Make sure you keep the drill bit truly vertical 5 Chop out the waste material to produce a clean rectangular shape.
-
However, this could be minimized if every tunnel is bored with a road header with extremely strong drill bits.
-
Several attendees shared what they have done at their facilities regarding reprocessing drill bits.
-
The trail down to the foot of the falls was all but vertical, a white-knuckle descent by means of chains and old drill bits hammered into the rock.
-
He's wearing a belt with screwdrivers, drill bits, spanners, hacksaws and nails lodged in every pocket.
-
You drill out small holes in the outer cortex in two lateral skull locations with custom drill bits at the incision site.
-
And they planned to modify the drill bits to make them less susceptible to jamming from the rocks.
-
Look for drills described as high-speed drill bits.
-
Once I was confident I had the right location (by measuring and remeasuring about 50 million times) I drilled a hole using a 1/4 inch drill bit.
-
My reaction to that, which basically fueled my skepticism today is this: here's a guy who tells a gun owner his factory rifle is basically crap and needs "truing", and that he (Jarrett) has just the skills to do the job, and yet he (Jarrett) would never resharpen a drill bit for fear that the bit would go "off center" and trusts that drill bits coming out of the factory are true and properly centered.
Kenny Jarrett, in Perspective
-
Mark your drill bit with a ‘flag’ of masking tape to ensure you don't drill too deeply.
-
Full instructions for use are supplied, to enable even inexperienced d-i-yers to put the edge back on their drill bits.
-
I elected to drill through the clear top first with a drill bit for the box ...
-
Try to remove some of the material first with a spade bit or drill bit.
-
It has reverse action which is basically used for removing debris and jammed drill bits.
-
Drilling was a difficult task, with good bullies causing the demise of many a parent's drill bit.
-
Place the entire steering knuckle assembly in a vise and re - drill using the # Q drill bit.
-
Most windshield repair kits include a bracket with a built-in suction cup pump that adheres to the windshield, as well as a drill bit that can create a tiny opening into the damaged area for the repair resin to flow into.
SciFi, Fantasy & Horror Collectibles - Part 102
-
Using the recommended drill bit size, drill through the handrail, then change to masonry drill to go through the wall.
-
Get the special drill bit to bore the correct-size hole for the job.
-
During the same month, a Makita drill and drill bits, in their original case were also found and never claimed.
-
Drilling can be done with many of the same tools you use for drilling wood or metal, including twist drills, brad point drill bits, spade bits or a hole saw with a pilot bit.
-
The drill bit well.
