How To Use Butt weld In A Sentence
-
Fatigue strength of butt welds is very low.
-
The process of Cu - Al pipe butt welding was analyzed , which is divided into 6 steps.
-
Aiming at the attachment process requirements of the U structural section's flash butt welder, the special gas-liquid drive gear and pressure clamp system were designed.
-
This takes place particularly in the parent plate under butt welds, the cracks following the line of the sulphide inclusion stringers.
-
For moment connections of square steel tubes, based on the unreinforced connection using penetrated butt welds, two types o.
-
The result shows that the forecast controller exhibits excellent performance on eliminating synchronism of upsetting force in flash butt welding.
-
Impact strength of fusion butt welding joint of polyethylene pipes was tested with a digital impact tester, and some actual fusion welding cases were commented.
-
For the large cross-section of welded steel, you can generally use electromagnetic induction welding, laser welding and flash butt welding, etc.
-
Buckling of thin plate due to butt weld was investigated using inherent strain method as an equivalent load.
-
It was successfully applied butt welding of circumferential of pressure vessel using pulse MAG welding.
-
Plasma - arc welding ( PAW ) may be used for hard surfacing, overlaying and fully automatic butt welding.
-
A three-phase D. C. flash butt welder UZ-350 controlling by PLC for welding rims are introduced.
-
The paper introduced a PLC network (MELSECNET/MINI)control system which is used for controlling flash butt welding machine set.
-
The butt welder is widely used in butt joint of such materials as steel, iron, copper and aluminum rod. It is also used in the butt joint of flat bar, flat aluminum, steel tube and steel tube.
-
In this paper, the defects appeared in flash butt welding for HSS cutting tools have been analyzed. And the effective resolving way has been put forward.
-
This article introduced the experiment of residual stress in flat tubeplate head of large scale fuel boiler that was manufactured by cold rotary extruding and butt weld.
-
The series welding machines get the optimal design. To be the same with multi-measure and different materials butt welding.
-
A reliable way to improve the quality of spiral pipe was the substitution of high frequency butt welding for HF lap welding.
-
Traditional laser butt welding of steels of different thickness to produce a monobloc component was out of the question.
-
In this paper, the residual welding stresses in a low carbon steel girth butt welded pipe are calculated with a nonlinear finite element code ADINA.
-
This paper has laid a foundation for the further work to the development of the new equipment and new technology of rail flash butt welding.
-
The invention relates to a new process method and device of flash butt welding joint in steel bar continuous connection.
-
This paper describes the development of high - pressure steel butt welding bends with straight ends.
-
This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.
-
Development of HRB 500 Grade Reinforcement and Test Study of Its Flash Butt Welding.
-
There are four phases and dozens of parameters in preheating flash butt welding technology used for great section workpiece's welding.
-
The executive mechanism of Cu-Al pipe butt welder, based on above, was designed, including its air system and mating clamper.
-
UNQ butt welders can be connected to the straightway and ball joints of low-carbon steel, copper and aluminum, and are widely used to weld rings.
-
In this paper, on the base of the study of flash butt welding theory, a new intelligent control system of rail flash butt welding is developed.
-
The respective feasible and cost- efficient size ranges for tubes produced by ultrasonic lap welding and TIG butt welding are suggested by means o...
-
At present foreign countries use flash butt welding technology to achieve the billets connection.
-
A simplified 2D axial symmetry model was founded against the features of steel stick in flash butt welding. The temperature field was simulated utilizing ANSYS software.
-
Study on the Joint Deformation and the Interface Contaminant Ejection Rate in DC Upset Butt Welding.
-
Ultrasonic flaw location in semisphere butt welds by sound path method is described.
-
Flash impetus and adopting projection anulus controlling upsetting, steady speed flash and quality of butt welding point is well.
