Get Free Checker

How To Use Bushing In A Sentence

  • To assemble the unit, thread the nipple into the ball valve, then thread the nipple into the bushing.
  • The implementation of additional steps in the safe job working procedure (i.e., testing the bushings with a ‘noisy tester’ or statoscope) prior to performance of maintenance would indicate to the employee the presence or non-presence of electrical energy in the bushings.
  • Do not remove collar bushing with valve under pressure.
  • Everything about the Rolls feels gusseted, wrapped in velvet, strung with silk, double-isolated with hydro-elastic this-and-that and suspended on bushings made of fetal pigskin. Rolls-Royce Builds a Real Car
  • Moreover, increasing the stiffness and damping of lower control arm rear bushing and the steering column inertia can effectively reduce the shimmy caused by brake judder.
Enhance Your English Writing Skills
Fix common errors and boost your confidence in every sentence.
Get started
for free
Enhance Your English Writing Skills
  • Moreover, increasing the stiffness and damping of lower control arm rear bushing and the steering column inertia can effectively reduce the shimmy caused by brake judder.
  • Strip away the jargon, and you are talking about ambushing terrorist groups, raiding weapons shipments in transit, and rescuing hostages.
  • This lube is for slides, rails, bushings - anywhere you need good lube to migrate.
  • Clin­ton in the early 2010s encour­aged the impov­er­ished coun­try to eliminate political parties with demonstrated popular support, then selected the candidates for a presidential run-off election, bushing aside the objections of Haiti's electoral council, leaders, media, political parties, human rights groups, electoral code, constitution and voters. Isabel Macdonald: Clinton Apologizes for U.S. Role in Destroying Haitian Democracy (Happy April Fool's Day!)
  • Moreover, increasing the stiffness and damping of lower control arm rear bushing and the steering column inertia can effectively reduce the shimmy caused by brake judder.
  • I think they might have let me know in advance what they were planning instead of ambushing me, don't you?
  • The bushing is secured in place by a solid arbor that passes through the front of the frame, through the middle of the bushing and is locked in place by the pivoting barrel and ejector rod.
  • Bushing or Waiting in the bushes is passing when you hold enough cards to make trump, hoping instead to euchre the opponent who picks up.
  • The bearings for lower shaft consist of solid bushings fastened into trunnion, and are provided with oil-chamber and capillary felt, making them practically self-oiling and dust-proof.
  • The bushing retainer allows cartridge removal without disassembly.
  • He looks like a damn pirate, with his hair and beard bushing around his face like that.
  • He ran his fingers through the gray bushing up from his scalp.
  • Choose from our varied range of necessary bathroom fittings that includes German type bib cocks, wall & sink mixers, stopcock, angle valves, couplings, nipple, reducers, bushings, tee and elbows.
  • An additional bronze bushing is used between the ram and its pivot pin.
  • Manhunt requires stealth, tactical skullduggery and unsportsmanlike ambushing. Canada.com
  • Maybe you two should be hashing your problems out in counseling instead of drive-by ambushing an innocent bystander.
  • The control arms have been in the car since 1997, and though I've looked at them from time to time, I'd never disassembled them to inspect the polyurethane bushings.
  • The impeller on the water pump was just about gone and the bushing holding it to the shaft was cracked.
  • He stroked his beard, grinning to himself, his parents wouldn't recognise him with the fiery red beard already bushing aggressively from his jaw.
  • Other aluminum bearing applications are in heavy tooling, such as boring mills, presses, lathes, milling machines, and grinding mills, and as hydraulic pump bushings.
  • The kit contains one match barrel, one match bushing, three snap-in moon-shaped shims of different thickness, one link and pin, and two pieces of shim stock.
  • The range includes track roller, carrier roller, sprocket, idler, track link assembly, track shoe, track bolt and nut, bucket pin and bushing etc.
  • The ride is made sportier by the combination of the bigger tires and slightly stiffer bushings, and steering is tightened up via a different steering gear.
  • He designed and made a sizing die with interchangeable bushings of progressively smaller diameters.
  • Mount the oversize bushing tap in any tap handle, apply cutting oil and re-tap the grip frame bushing holes.
  • Lighter in weight than solid shafting, the tubular shaft components are designed to cool quickly, extending the life of slide bushings operating at high load and speed.
  • The chassis-tuning details are pretty arcane, but they include firmer springs in front and much firmer springs in back; as well as stiffer control arm and subframe bushings; thicker antiroll bars front and rear; lighter wheels and tires (less unsprung mass) and a general, sympathetic harmonizing between suspension, wheel-and-tire package and powertrain. Fanboys in Flight: Subaru Roars In on a Wing
  • Then, I pulled my hair into a knot without bushing it and went downstairs.
  • Still less by what methods he preserved his game, whether by 'bushing' or how, -- and if the partridge-seasons were Past and Present
  • Our main products include chain track, track roller, carrier wheel, guiding wheel, driving wheel, track shoe screw, shaft sleeve, pin, bushing, and link rod, recoil spring etc.
  • The book is replete with disturbing images of violent disruption, principally of disguised rebels ambushing small peasant communities.
  • In this department they mold all the ca parts that the harrows use, such as spacers, bushings, braces, (word indistinct), and so on. CASTRO ADDRESSES STEELWORKERS IN HAVANA
  • The front end is contained within a tapered bushing that mates with a corresponding taper in the slide.
  • The range includes track roller, carrier roller, sprocket, idler, track link assembly, track shoe, track bolt and nut, bucket pin and bushing etc.
  • Check the bushing, idler, and driver wheel on the seed carrier.
  • This makes it possible to rebore bushings which have been used on the left side and reapply them on the right side, thus prolonging the life of the bearings.
  • It is done by hand, using a lathe to spin the barrel and a skilled touch with fine emery paper to polish the barrel to fit the bushing.
  • For stability the welded steel sub-frame is double-isolated from the driveline, and the L-shaped lower control arm incorporates a liquid-filled bushing for added isolation.
  • Laughridge had to install a screw-in bushing of his own manufacture.
  • Tighten leaf spring press until bushing is extracted from leaf spring.
  • The chassis-tuning details are pretty arcane, but they include firmer springs in front and much firmer springs in back; as well as stiffer control arm and subframe bushings; thicker antiroll bars front and rear; lighter wheels and tires (less unsprung mass) and a general, sympathetic harmonizing between suspension, wheel-and-tire package and powertrain. Fanboys in Flight: Subaru Roars In on a Wing
  • Is it just me or is Obama "bushing" it up a little bit on this one. CNN Transcript May 6, 2009
  • The lower end of the shaft is covered by a removable bushing which is easily inspected after the guide-bearing has been taken down. Steam Turbines A Book of Instruction for the Adjustment and Operation of the Principal Types of this Class of Prime Movers
  • The suspension is upgraded with new bushings, springs and shocks and the tuning is refined for better ride and handling.
  • In the medical and pharmaceutical sectors, Amiloy 22 can be used to fabricate shaft bushings, bearings, piston rings, pump parts, and slide pads.
  • Concerning the refilling or "bushing" as it is termed of the peg-holes, The Repairing & Restoration of Violins 'The Strad' Library, No. XII.
  • The levels contain marks showing the computer soldiers the best positions for hiding, sniping or ambushing.
  • A shower of gravel barely missed me, hurled by naughty boys who played among the ruins, ambushing one another.
  • Headless press fit bushings offer two advantages: they can be installed flush with the jig plate without counterboring the mounting hole and they can be mounted closer together than headed bushings.
  • He traveled the country giving talks and ambushing naive scientists in debates before huge, receptive audiences of churchgoers.
  • If you feel you're missing out on watching tigers launch assaults on nilgai, or muggers ambushing chital as they bend down to drink, take heart.
  • I have a Llama 45, and it never shot very accurately since new, so I got the bright idea to slug the barrel. (after trigger job, oversize link pin, tightened up barrel bushing, polished crown, etc.) Some Rifle Barrels are Faster than Others
  • Other aluminum bearing applications are in heavy tooling, such as boring mills, presses, lathes, milling machines, and grinding mills, and as hydraulic pump bushings.
  • Most of the time, fixing or replacing loose bushings means backing them out, applying a thread locking compound, retightening them and forgetting immediate future concerns.
  • If you feel you're missing out on watching tigers launch assaults on nilgai, or muggers ambushing chital as they bend down to drink, take heart.
  • Reliability- The process fluid flows through the trim, flushing away solid deposits above and below the guide bushing , thus reducing the possibility of a sticking valve plug.
  • At one point I had to adjust the crotch of her leotard very carefully because some pubic hair was bushing out.
  • The ideal replacement bushing is one made from polyurethane. F&S Guide to Truck Suspension and Lifts
  • Outer protective shield bushing in anti-corrosion alloy.
  • Other fish on the go are pan-size bream, luderick and drummers (off the rocks) with some large flathead ambushing bait in and around the shallows.
  • It is made with A514 steel and hardened bushings and requires no additional hydraulics.
  • Improved suspension parts ranging from bushings to springs, shocks and tires make this vehicle a stand out in terms of handling and ride quality.
  • Training was similar to that carried out by the commandos, with emphasis placed on raiding, sentry elimination, ambushing, cross-country night navigation exercises, and target attacks.
  • In yet another construction, an annular cylinder block supports a pair of opposed weighted lever arms and sample support bushings in tangential contact with a rotor surface.
  • The shaft bushing and the resilient element tightly enclose the shaft while a firm connection with the shaft sleeve is secured.
  • Getting the screw out can strip the bushing threads in the frame.
  • The cylinder incorporates a central spring loaded bushing that permits the cylinder to move forward and backward.
  • Perhaps we have stumbled upon a party intent on ambushing us and raiding our lands.
  • Through advertising and promotional campaigns, the ambushing company tries to confuse consumers and to misrepresent the official sponsorship of the event.
  • Stephen described how he leaded as chief of his group, ambushing into the house where the drug ring was stationed.
  • Sometimes the first mode is resorted to with the addition of what is called bushing the peg-hole, that is, after the glueing performance has been gone through, it will last strong enough while the hole is being enlarged, a cylindrical plug of wood being inserted, and glued. The Repairing & Restoration of Violins 'The Strad' Library, No. XII.
  • Jones, Redding and Hornady also offer full-length sizing dies that incorporate their interchangeable neck bushings.
  • This lube is for slides, rails, bushings - anywhere you need good lube to migrate.
  • The two ambushing pantherine felids appeared to prefer foraging in densely covered settings and the dhole in open spaces.
  • 'bushing' or how, -- and if the partridge-seasons were 'excellent,' or were indifferent. Past and Present Thomas Carlyle's Collected Works, Vol. XIII.
  • All units feature single point depth control, heavy-duty trunnion style bearings on the front and rear gangs, walking tandems, and grease free bushings in the rockshaft area. Undefined

Report a problem

Please indicate a type of error

Additional information (optional):