How To Use Bristle brush In A Sentence
-
Backcomb your ponytail for volume but then smooth out with a soft bristle brush.
The Sun
-
Over rough surfaces such as stone or cement tile, you can use bristle brush to clean.
-
They demand coaxing with a bristle brush and an orangewood stick.
Buttered Side Down
-
Flip your head back up then smooth the top layer of your hair with a natural bristle brush.
-
Start by using a soft boar's head brush or similar natural bristle brush on your hair.
-
Apply two, preferably three coats of urethane varnish using a good quality natural bristle brush.
-
Accumulations of dust can be removed with a small vacuum cleaner after loosening with a dry, soft bristle brush.
-
Apply two, preferably three coats of urethane varnish using a good quality natural bristle brush.
-
Apply the solution to the brick; allow it to soften paint; and remove with scraper and stiff bristle brush.
-
Use a nylon-bristle brush for porcelain-coated cast-iron grates, and steel — not brass — brushes to clean uncoated cast-iron grates.
Putting away your grill? Here's the drill
-
Loosen dust and debris from the motherboard and expansion cards with a soft bristle brush.
-
Such natural bristle brushes are best suited for use with oil-base paints and stains, varnishes, lacquers and shellacs.
-
The use of a high quality natural bristle brush is recommended to lay on a furniture finish.
-
Mr. Gummage immediately supplied her with two bristle brushes, and sundry little shallow earthen cups, each containing a modicum of some sort of body color, massicot, flake-white, etc., prepared by himself and charged at a quarter of a dollar apiece, and which he told her she would want when she came to do landscapes and figures.
The Wit and Humor of America, Volume V. (of X.)
-
Put the gel on a brass or bristle brush and the inside of the bore is quickly coated with the cleaner, which stays in place without running.
-
Loosen dust and debris from the motherboard and expansion cards with a soft bristle brush.
-
Use a natural bristle brush and avoid stretching the hair when wet.
-
After removal, accentuate with the help of a round bristle brush.
-
Wet hair tends to stretch and break and is very vulnerable so never use a bristle brush on hair when wet.
-
Use a soft bristle brush to loosen the grime and if possible a sprayer to wash it all off.
-
Don't comb with a bristle brush when your hair is wet, because it can pull hair out more quickly.
-
Wet hair tends to stretch and break and is very vulnerable so never use a bristle brush on hair when wet.
-
Oil-base paints, enamels, varnishes, most stains and lacquers should be applied with a natural bristle brush.
-
If you have relaxed hair (as explained below in the chemical treatments section), it is best to use a natural bristle brush.
-
Use a good quality bristle brush - find one in your local health food shop.
-
After removal, accentuate with the help of a round bristle brush.
-
Apply the finish with a natural bristle brush in a steady and smooth manner.
-
For better results, use a natural bristle brush for more delicate items.
-
Apply the solution to the brick; allow it to soften paint; and remove with scraper and stiff bristle brush.
-
Whichever you use for a topcoat, pour a 4-inch pool in the center of the piece and brush the finish out to the edges with a soft bristle brush.
-
Scrub all crevices using a soft bristle brush to remove any visible debris from all crevices.
-
Backcomb your ponytail for volume but then smooth out with a soft bristle brush.
The Sun
-
Use a natural bristle brush, which works the stain into carvings and corners easier than a rag.
-
Wet hair tends to stretch and break and is very vulnerable so never use a bristle brush on hair when wet.
-
The cleaning of the micro-mesh screen is aided by the inclusion of a nylon bristle brush.
-
Loosen dust and debris from the motherboard and expansion cards with a soft bristle brush.
-
Accumulations of dust can be removed with a small vacuum cleaner after loosening with a dry, soft bristle brush.
-
It is recommended that natural bristle brushes never be used with latex coatings.
