How To Use Engine block In A Sentence
-
The engine block and alloy cylinder head is shared with the 1.4-litre Energy engine so the bore is identical.
-
To reduce a diesel engine's overall noise, an improved noise reduction design method for the engine block was proposed based on virtual prediction method.
-
To reduce a diesel engine's overall noise, an improved noise reduction design method for the engine block was proposed based on virtual prediction method.
-
The engine block and alloy cylinder head is shared with the 1.4-litre Energy engine so the bore is identical.
-
The impact was so intense that it cracked the engine block, ripped the seat bolts out of the floor board, caused the top of the car to cave in, and knocked both of my shoes off.
-
During very cold winters, ordinary water would freeze within the engine block and the radiator.
-
These are bolted to the engine block and sealed with the aforementioned head gasket.
-
You have to put cardboard up in the grates of your car to keep the engine block from freezing.
-
Their first few tools consisted of an engine block which was used as an anvil and some self-made hammers.
-
There was an expensive shriek of metal being crushed and the steam roller rose almost a full eight inches before the engine block shattered.
-
Water doesn't compress and the piston in effect hits a wall, bending or breaking a con rod and possibly shattering the engine block.
-
For example, an automobile engine block is normally cast iron except for some which might be cast aluminum.
-
The engine-component and cylinder-head moratorium includes, but is not limited to, engine blocks, cylinder heads, intake manifolds, fuel injectors, and superchargers.
-
Another was scraping resin off the engine block, to find some sort of identifying numbers.
-
To reduce a diesel engine's overall noise, an improved noise reduction design method for the engine block was proposed based on virtual prediction method.
-
It doesn't, however, have an aluminum engine block.
-
Not long ago, teams fashioned their engines from junkyard castoff engine blocks, and a good length of plumbing pipe made a nifty set of headers.
-
A few chunks of twisted metal will identify the delivery vehicles, especially if the bombers forgot to file off serial numbers on the engine block.
-
The engine block also gave forward protection.
FIGHTER BOYS: Saving Britain 1940
-
Ground the black cable to the engine block, and then connect the red cable to the batteries.
-
Only a few parts come from Japan, such as engine blocks and crankshafts for the gasoline engine.
-
So, for instance, a designer can see an engine block as a wire-frame display with all the cams and pistons shaded for better visibility.
-
The foundry is charging its furnaces to cast the engine block and cylinder heads.
Times, Sunday Times
-
Many blow holes exist in 495 A diesel engine block casting.
-
These are bolted to the engine block and sealed with the aforementioned head gasket.
-
In addition there is a danger that freezing of water and the consequent expansion might even crack the radiator or the engine block.
-
Cables, gantries and all manner of unrecognisable machinery hamper navigation, although as time passes an exposed engine block allows me to make a bit more sense of the scene.
-
A ground strap bolted to the engine block may not do the job; head gaskets, silicon, and bolt sealer can electrically insulate the cylinder heads from ground.
-
Your engine block could freeze in the subzero winter temperatures - which seem to last from September to mid-June.
-
To reduce a diesel engine's overall noise, an improved noise reduction design method for the engine block was proposed based on virtual prediction method.
-
These are bolted to the engine block and sealed with the aforementioned head gasket.
-
The machined engine blocks, cylinder heads and clutch and transmission cases meet with the other engine components for the final assembly process.
-
The crankshaft and connecting rods are visible through the sides of the engine block.
-
Pistons for internal combustion engines are hard anodized to minimize the amount of thermal expansion in relation to possible thermal expansion of the engine block.
-
The engine block is produced with 319 - T5 aluminum and the deep-skirted casting has cast-iron cylinder liners.
-
The engine block and cylinder head are made of cast aluminium.
-
You need a piston, a manifold, then you need an engine block, a carburetor, a distributer, this that and the other thing.
-
Descending the reef again, I came across the engine block and crankshaft.
-
The engine block and alloy cylinder head is shared with the 1.4-litre Energy engine so the bore is identical.